The Reach and Wash window cleaning is a cleaning method used for washing windows, especially in high-rise buildings. It’s a water-fed pole system that uses purified water to clean windows, leaving a streak-free finish.
The system consists of a long, telescopic pole that can extend up to several stories high. At the end of the pole is a brush head that is connected to a hose. The hose supplies purified water from a tank or other water filtration system. The brush head is used to scrub the window surface, and the purified water rinses away the dirt and grime.
The purified water used in the Reach and Wash system has all the impurities removed, which prevents spotting and streaking when the water dries. This is because ordinary tap water contains minerals and other impurities that can leave streaks and watermarks on windows after they dry.
Overall, the Reach and Wash system is a safer and more efficient method of cleaning windows than traditional methods like using ladders or ropes. It is also an environmentally friendly option since it does not require the use of any detergents or cleaning chemicals.
Can you clean commercial buildings with the Reach and Wash method
Yes, the Reach and Wash window cleaning system is commonly used to clean windows on commercial buildings, including high-rise buildings. In fact, it is particularly well-suited for commercial window cleaning because it is a safe, efficient, and cost-effective method for cleaning windows at height.
The Reach and Wash system can be used to clean windows on a variety of commercial buildings, including office buildings, hospitals, schools, hotels, and more. The water-fed pole can reach up to several stories high, allowing the operator to clean windows on tall buildings without the need for ladders or other equipment.
One of the advantages of using the Reach and Wash system for commercial window cleaning is that it is a fast and efficient method. The purified water used in the system helps to remove dirt and grime quickly, leaving windows clean and streak-free. This can save time and labor costs compared to traditional window cleaning methods.
Overall, the Reach and Wash window cleaning system is a versatile and effective method for cleaning windows on commercial buildings of all sizes and shapes.
Can you clean the inside of an atrium with the Reach and Wash system
The Reach and Wash window cleaning system is primarily designed for cleaning the exterior of windows, including those located in atriums. However, it may not be suitable for cleaning the interior of an atrium, depending on the design and configuration of the space.
The water-fed pole used in the Reach and Wash system is typically designed to clean windows from the outside. While the pole can be manoeuvred to reach windows located inside an atrium, it may not be able to reach all areas, particularly those located high up or in hard-to-reach corners.
Furthermore, the purified water used in the Reach and Wash system is not typically designed for use indoors. Depending on the type of atrium and its construction, there may be concerns about water damage to interior surfaces or the potential for slip hazards.
In summary, while the Reach and Wash window cleaning system can be effective for cleaning windows in an atrium from the outside, it may not be suitable for cleaning the interior of an atrium. Other cleaning methods, such as traditional squeegee and bucket techniques, may be more appropriate for interior cleaning. It’s always best to consult with a professional window cleaning service to determine the best cleaning method for your specific situation.
Do you need a risk assessment for reach and wash window cleaning
Yes, a risk assessment is an important part of any window cleaning project, including those using the Reach and Wash system. A risk assessment is a careful examination of the tasks involved in the cleaning process, the potential hazards associated with those tasks, and the measures that can be taken to minimise or eliminate those hazards.
The Reach and Wash window cleaning system involves working at height, which poses a significant risk to the safety of the operator and others in the vicinity. In addition, there may be other hazards associated with the specific building or site where the cleaning is taking place, such as nearby power lines or busy pedestrian areas.
A thorough risk assessment will identify these hazards and help to develop appropriate safety measures to prevent accidents and injuries. These measures may include using appropriate personal protective equipment, securing the area around the cleaning site, and ensuring that the equipment used is in good condition and functioning properly.
It’s important to note that a risk assessment is not a one-time event but should be an ongoing process throughout the cleaning project. This is because conditions can change over time, and new hazards may emerge. Regularly reviewing and updating the risk assessment ensures that the cleaning project remains safe for all involved.
Overall, a risk assessment is a critical part of ensuring the safety of the cleaning team and others in the area during Reach and Wash window cleaning projects.
Do you need to create a method statement for reach and wash window cleaning
Yes, a method statement is an important part of any Reach and Wash window cleaning project. A method statement is a document that outlines the steps involved in the cleaning process, including the equipment used, safety measures taken, and any other relevant information.
The method statement should include a detailed description of the Reach and Wash system being used, including how the purified water is supplied and the height to which the water-fed pole can be extended. It should also outline the cleaning procedures, such as how the brush head is used to scrub the windows and how the purified water is used to rinse away dirt and grime.
In addition to the cleaning procedures, the method statement should also include a description of the safety measures being taken to protect the cleaning team and others in the area. This may include using appropriate personal protective equipment, securing the area around the cleaning site, and ensuring that the equipment used is in good condition and functioning properly.
Other information that may be included in the method statement includes the cleaning schedule, any relevant permits or licences required for the project, and emergency procedures in case of accidents or incidents.
Overall, a method statement is an essential part of ensuring that Reach and Wash window cleaning projects are carried out safely and effectively. It helps to ensure that everyone involved in the project is aware of the steps involved and the safety measures being taken to minimise risks and prevent accidents.
Can you clean industrial cladding with reach and wash window cleaning method
Yes, the Reach and Wash window cleaning system can be used to clean industrial cladding, depending on the type of cladding and the height at which it is located. However, there are some factors to consider when using the Reach and Wash system for industrial cladding cleaning.
First, the water-fed pole used in the Reach and Wash system can typically reach up to several stories high. However, if the cladding is located at a greater height, a different method may be required to clean it effectively.
Second, the type of cladding being cleaned will determine the effectiveness of the Reach and Wash system. For example, if the cladding has a rough or textured surface, it may be more difficult to remove dirt and grime using the purified water alone. In this case, additional cleaning techniques, such as pressure washing or manual scrubbing, may be required.
Finally, the size and shape of the building will also affect the effectiveness of the Reach and Wash system. If the building has irregular shapes or hard-to-reach areas, the operator may need to use additional equipment or techniques to clean these areas effectively.
Overall, the Reach and Wash window cleaning system can be an effective method for cleaning industrial cladding, but it’s important to consider the specific factors of the building and cladding being cleaned to determine the most appropriate cleaning method. It’s always best to consult with a professional window cleaning service to determine the best cleaning method for your specific situation.
Reach and Wash Window & Gutter Cleaning Service
2 Gills Farm Cottages, Gill’s Rd, South Darenth DA4 9LE
01474773350
https://reach-wash-window-cleaning.co.uk